• C1
  • C2
  • C3
  • C4
  • C5
  • C6
  • C7
  • C8
  • C9
  • C10
  • C11
  • C12
  • C13

COAD-1 Standard Model

Model COAD-1
Format COAD-1 Standard Model
Benefits Most popular product line. Equipped with high strength wind-bar, wind-bar locks which prevents separations under high wind conditions. Easy sheet installation makes it efficient to replace individual sheets of damaged sheets caused by vehicles and equipment. Designed for easy exchange between winter and summer sheets

Frame

A Frame Description
– Manufactured using high-strength Aluminum dual extrusion molding method. High resistancy against strong wind and separable by segment
– Convenient & affordable A/S.
B Frame Description
– Round-shaped design improves the overall appearance. WIND LOCK SYSTEM helps to prevents Derailment.
C Frame Description
– Encapsulated bearing design prevents the foreign materials damaging the parts and the rust.

Sheet/Panel

Customizable to meet customers’ requirements

< Antibacterial, flame-retardant, nonwoven articles double layer structure >

Top grade materials (SOL Screen Coating, high strength) which is used for boat manufacturing
– No fabric material distortion, no pin-hole, excellent adhesion characteristics
– Surface Treatment/Coating: Fluoride (PVDF), acrylic, PU treatment. Can apply the treatments up to 5 times

Motor

  1. Highly efficient perpendicular shaft speed control: about 20% more efficient compared to a worm gear motor, efficiency rate is 85% or higher.
  2. Low noise & low vibration: lower noise and vibration compared to bevel type motors (avg. 52 ~ 65dB)
  3. High strength and long life: increased gear strengths and life by using carburized gears.
  4. Light weight & optimization: reduced the installation space using offset method; and reduced the weight of the case and the speed control unit.
Horm gear Hypoid gear Note
Motor volume(kW) 0.4 0.4
Reduction ratio 10:1 ~ 20:1 10:1 ~ 20:1
Efficiency 60% 85% about 25%
difference
Output Torque (kg-m) 7.8 11.0 about 30%
difference
Size(mm) Including motor 416x238x195 372x132x118 about 50%
difference
Weight(kgf) Including motor 20 11 about 50%
difference

Controllers

Controller Description

  1. High performance inverter controller specially designed for high speed auto doors
  2. Basic, recovery type, Counter-Balance, including all applicable Doors
  3. ENCODER / LIMIT TYPE position control can be combined
  4. 1HP ~ 3HP can be applied to the motor
  5. The person / vehicle STEP 2 that separates the open control
  6. The various interlocking devices (air curtain, conveyors, flashing light) and compatibility available
  7. The maximum repellent effect as air curtains and air-conditioning settings associated time
  8. Damage caused by external controllers to prevent flooding by rainwater inflow and waterproof CASE

Airtight seal

As it is able to withstand internal pressure such as strong winds, it is equipped with a seat release prevention part inside the frame, and prevents hog coring or leakage by sealing brass on both sides of the frame.

Frame

A Frame Description
– Manufactured using high-strength Aluminum dual extrusion molding method. High resistancy against strong wind and separable by segment
– Convenient & affordable A/S.
B Frame Description
– Round-shaped design improves the overall appearance. WIND LOCK SYSTEM helps to prevents Derailment.
C Frame Description
– Encapsulated bearing design prevents the foreign materials damaging the parts and the rust.

Sheet/Panel

Customizable to meet customers’ requirements

< Antibacterial, flame-retardant, nonwoven articles double layer structure >

Top grade materials (SOL Screen Coating, high strength) which is used for boat manufacturing
– No fabric material distortion, no pin-hole, excellent adhesion characteristics
– Surface Treatment/Coating: Fluoride (PVDF), acrylic, PU treatment. Can apply the treatments up to 5 times

Motor

  1. Highly efficient perpendicular shaft speed control: about 20% more efficient compared to a worm gear motor, efficiency rate is 85% or higher.
  2. Low noise & low vibration: lower noise and vibration compared to bevel type motors (avg. 52 ~ 65dB)
  3. High strength and long life: increased gear strengths and life by using carburized gears.
  4. Light weight & optimization: reduced the installation space using offset method; and reduced the weight of the case and the speed control unit.
Horm gear Hypoid gear Note
Motor volume(kW) 0.4 0.4
Reduction ratio 10:1 ~ 20:1 10:1 ~ 20:1
Efficiency 60% 85% about 25%
difference
Output Torque (kg-m) 7.8 11.0 about 30%
difference
Size(mm) Including motor 416x238x195 372x132x118 about 50%
difference
Weight(kgf) Including motor 20 11 about 50%
difference

Controllers

Controller Description

  1. High performance inverter controller specially designed for high speed auto doors
  2. Basic, recovery type, Counter-Balance, including all applicable Doors
  3. ENCODER / LIMIT TYPE position control can be combined
  4. 1HP ~ 3HP can be applied to the motor
  5. The person / vehicle STEP 2 that separates the open control
  6. The various interlocking devices (air curtain, conveyors, flashing light) and compatibility available
  7. The maximum repellent effect as air curtains and air-conditioning settings associated time
  8. Damage caused by external controllers to prevent flooding by rainwater inflow and waterproof CASE

Airtight seal

As it is able to withstand internal pressure such as strong winds, it is equipped with a seat release prevention part inside the frame, and prevents hog coring or leakage by sealing brass on both sides of the frame.